Outline of product
An uncompressed recorder that supports 8K and 4K signal with full specification up to 8K 120p RGB 4:4:4.
Features
● Uncompressed recording of 8K 120p, 100p, 60p and 50p signals
● Uncompressed recording of 4K 120p, 100p, 60p and 50p signals
● 120p recording and playback by 12G-SDI Quad × 2 or U-SDI
● Synchronous multiple unit operation supporting high frame rates of 240p and higher
● Usage of the SSD pack "MM-212 (8TB)" as recording medium which utilizes NVMe SSD
● SSD pack is sold separately
● Ability to edit or delete recorded clips and create a playlist combining multiple clips
● Supports 10GbE backup
● Supports up to 32 channels of audio recording
● 4U rackmount size
Recording Time
| Video Format | Recording Time with MM-212 usage) | SSD packs (required amounts) |
|---|---|---|
| 4K YCBCR 4:2:2 59.94p/50p | 75 minutes | 1 |
| 4K RGB 4:4:4 59.94p/50p | 50 minutes | 1 |
| 4K YCBCR 4:2:2 119.88p/100p | 75 minutes | 2 |
| 4K RGB 4:4:4 119.88p/100p | 50 minutes | 2 |
| 8K YCBCR 4:2:2 59.94p/50p | 75 minutes | 4 |
| 8K RGB 4:4:4 59.94p/50p | 50 minutes | 4 |
| 8K YCBCR 4:2:2 119.88p/100p | 75 minutes | 8 |
| 8K RGB 4:4:4 119.88p/100p | 50 minutes | 8 |
Specifications
| HR-7520 | |
|---|---|
| Video Format | Resoliution ： 7680×4320 / 3840×2160 Sampling ： RGB 4:4:4 12bit* / YCBCR4:4.4 10bit* /YCBCR 4:2.2 10bit / YCBCR 4.2:0 10bit* Frame Rate： 120p / 119.88p / 100p / 60p / 59.94p / 50p *Supports only U-SDI |
| Video Input | Optical (ARIB STD-B58) 1ch 12G-SDl (SMPTE ST 2082-1) 8ch Supports ancillary data（Audio, TC） |
| Video Output | Optical (ARIB STD-B58) 1ch 12G-SDl (SMPTE ST 2082-1) 8ch Supports ancillary data（Audio, TC） |
| Monitor Out | 12G-SDI (SMPTE ST 2082-1/10) or HD-SDI (SMPTE 292M) Sampling ： YCBCR 4:2:2 10bit Frame Rate ： 60p / 59.94p / 50p / 60i / 59.94i / 50i |
| Sync | HD tri-level/BB signal 75Ω BNC Passive Through (Automatic Termination) |
| MADI I/O | 75Ω BNC 1ch |
| TIMECODE I/O | BNC 1ch LTC I/O |
| RS422 | D-Sub 9pin female connector SONY Protocol |
| GPIO | D-Sub 15pin Concave connector Contact control, TTL input, maintenance use |
| Sync I/O | Unit sync signal |
| USB 2.0 | Type-A connector 2ch Host side (for connecting keyboard and USB memory) |
| 10GbE | SFP+ connector for data transfer |
| SD Card Slot | For maintenance (version upgrade), log output |
| Headphone | 3.5mm Stereo Mini Jack |
| General Specifications | |
|---|---|
| Power Requirements | AC100V－240V |
| Operating Temperature | 5 to 40℃（No Condensation） |
| Operating Humidity | 20 to 80％ RH（No Condensation） |
| Power Consumption | 350W MAX |
| Dimensions | 430(W) X176(H) X430(D)mm (4U Rack mount size/Excluding Protrusions） |
| Weight | 15.0 kg or less (not including SSD pack) |
Downloads
