Main Features

・ By using this single unit, MHL interface can be all checked.
・ Real time data analyzing function in 3 ways:
Receiver mode (emulating MHL Sink): for measuring MHL Protocol, Video Timing,
Video data, Packet, HDCP, Audio and EDID.
Through mode (emulating MHL cable): for checking communication between MHL
source and MHL display.
Generator mode (emulating MHL source): for functioning as MHL source.
・ CBUS and VBUS lines checking function
・ 12.1 inch display shows analyzing result and input video.

Function Details

◆General Analyze Function
・ Video Timing analyzing
・ Video Data analyzing
・ Packet analyzing
・ HDCP check
・ Audio measuring
・ EDID edit

◆MHL Specific Function
・ CBUS Line monitoring (MHL Sideband Channel Commands)
・ Device Register Space edit
・ VBUS Level check, Current check

◆Other Function
・ Signal generating
・ Log saving (video/audio timing, InfoFrame/Packet, CBUS/VBUS monitor)



MHL Video
input / Output
Standard MHL Specification
Dot Clock
25 - 74.25MHz
TMDS Clock
Max 225MHz
Measuring accuracy
By one pixel
Color space
Bit width
8bit : RGB / YCbCr 4:4:4 / 4:2:2
10, 12-bit : YCbCr 4:2:2 only
MHL Audio
Input / Output
Samoling frequency
32 - 192KHz (8ch)
Note) There is limitation depends on timing.
Format L-PCM
Bit number 16, 20, 24-bit
AUX Channel
E-EDID Ver.1.4
HDCP Supported
Display 12.1 inch (XGA 1024x768)
Full size display or Dot-by-dot display selectable
Connector Input (HDMI)x1, Output (Micro-USB)x1
Through mode: Input (HDMI)x1, Output (Micro-USB)x1
Note)use MHL cable.
Speaker / Headphone jack (Audio)
General specification
Power supply
AC100 - 120, 200 - 240V
Power consumption 50W Max
Operating temperature +5 to 40℃
Storage temperature -10 to 60℃
Humidity 30 to 80RH% (no condensation)
Dimensions 340(W)x265(H)x150(D)mm (without projected paets)
Weight About 4Kgs


■Data sheet